Heath Consultants Hi Flow Sampler - Manual (Page 28)

Operation Hi Flow

Sampler
28 Instruction 0055-9017
2.17.2 Edit Test IDs
Edit a previously entered Test ID or to create a new one as follows:
1. First select the Test ID to edit per Section 2.17.1 Select Test IDs. To create a new
Test ID, select the last Test ID number that can be displayed – the last Test ID
number will always be blank.
2. From the Expanded Main Screen, select Menu > Access Test IDs > Edit Test IDs.
3. Use the following keys to select and then enter the desired character.
∧∨
– displays desired alphanumerical character
I/O ↵ – selects displayed character and moves cursor one space
to the right
ESC – moves cursor one space to the left
Tip: To quickly scroll through the characters, press and hold down
the ∧ or ∨ key.
Tip: The “space” character is between the number “9” and the capital “A”.
In the example below, the Test Location has been changed from 1 to 2 with the
cursor positioned to the immediate right of the number 2.
4. After all characters have been selected, press and hold down the I/O ↵ key to move
the cursor to the end of the screen; after which, the screen shown in Step 2 should
reappear.
5. Press the ESC key twice to return to the Main Screen.
2.17.3 Send Test IDs
The following describes how to download the current list of Test IDs to a computer that
is running Windows ® HyperTerminal as the communications program. If a different
operating system and/or communications program is being used, then please consult
the appropriate instruction manuals for those products.