Hatteland Display 13 inch - HD 13T21 MMC (Widescreen, Inte Cor2 Duo CPU) - Manual (Page 5)

5
IND100131-26
Contents of package
Item Description Illustration
MEDIA STD01
Documentation and Driver DVD for factory installed components like mainboard, IDE, network etc.
It also includes the Touch Screen driver for units delivered with a factory mounted touch screen. For
most recent drivers, please visit “www.hatteland-display.com/archive”.
Note: To use this DVD disc you will need an external USB CD/DVD drive or provide means of get-
ting contents copied over via USB memory stick/network to MMC unit. In some cases (due to revi-
sions) a provisonal CD (PRO02-xxx) may be delivered with the unit instead.
Menu browser
for Microsoft®
Windows®
Operating
Systems
Recovery Image
(located on hidden partition on SSD)
Note: Only applicable for factory delivered units with SSD hardware.
Product Declaration, Checklist and Burn-in Certificate (3 x A4 sheets).
Terminal Block Connector Kit
Terminal Block Connector Kit as follows (may in some cases be already factory mounted):
2 x 2-pin Terminal Block 5.08 (Weidmüller 1944330000) for DC Power In (Dual or Single use)
1 x 4-pin Terminal Block 3.81 (Weidmüller 1792970000) for Solid State Relay
1 x 4-pin Terminal Block 3.81 (Weidmüller 1792970000) for Digital Input (isolated/protected)
1 x 5-pin Terminal Block 3.81 (Weidmüller 1792980000) for Safety Signal Relay (NO/NC)
1 x 5-pin Terminal Block 3.81 (Weidmüller 1792980000) for COM (isolated RS-422/485)
Refer to “Configuring Housing / Terminal Block Connector” section for usage.
Note: Location of module(s) may
differ between unit sizes
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.
Package may also include: (based on accessories/options ordered)
Item Description Illustration
Terminal Block Connector Kit
Depending on factory mounted options, Terminal Bracket Connector kit as follows:
4 x 5-pin Terminal Block 3.81 (Phoenix 1827732) for RS-422 / RS-485 NMEA COM (PCA100293-1)
4 x 4-pin Terminal Block 3.81 (Weidmüller 1792970000) for CAN Interface (HT 00254 OPT-A1)
1 x 5-pin Terminal Block 3.81 (Phoenix 1827732) for Mechanical Relay / RS-422/RS-485