Hatteland Display 13 inch - HD 13T21 MMC (Widescreen, Inte Cor2 Duo CPU) - Manual (Page 27)

Physical Connections
27
IND100133-46
Network/LAN INPUT / OUTPUT (NET A / NET B / NET C / NET D):
Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable
connector ”clicks” into the RJ-45 connector. This connector will allow remote control of the display unit to control
common functions like brightness, change input source and more. Based on model, 2 or 4 RJ-45 ports is available.
CAN INPUT / OUPUT: (X8 CAN 1 / X9 CAN 2) (optional)
This connector is only available on selected units by factory default installation/requests. The CAN module with 2
independent channels allow the user to add their own functions via dedicated software, such as real time critical and
safe functions to be communicated in and out of the unit. Connect and fasten your cables from your compatible
external equipment to the 4-pin Terminal Block 3.81 connector.
For Application Programming Interface (API) usage, please review dedicated chapter in this manual or via these links:
http://www.hatteland-display.com/pdf/misc/doc101357-1_hd_can_module_programmer_guide_windows.pdf
http://www.hatteland-display.com/pdf/misc/doc101356-1_hd_can_module_programmer_guide_linux.pdf
http://www.hatteland-display.com/drivers/can_gw_application_note_package.zip
USB INPUT / OUTPUT:
Supports any USB1.1 (12Mbps) and USB2.0 (480Mbps) compliant peripherals. Drivers for most USB devices are
usually included in operating system or on separate installation DVD’s delivered with Third Party products. USB 1.1
devices will operate in USB 1.1 mode (12 Mbps). USB1.1 (<10m), USB2.0 (<5m). Based on model, 2 or 4 ports is
available.
POWER INPUTS:
Connect your DC power cables to the 2-pin Terminal Block 5.08 connector. The internal DC power module supports
24VDC. The unit offer both Primary and Secondary power inputs for secure operation of the unit as well as; galvanic
isolated and automatic switch between power source.
API Interface : The presence of input power can be checked with:
For Intel® Atom™ Models, " AIPC_Read_GPI " command where;
DIO0_GPI7 = Bit 7 => Presence of secondary power input.
DIO0_GPI6 = Bit 6 => Presence of primary power input.
For Intel® Core™2 Duo Models,: " CPLD_Status " command where:
Bit 2 => Presence of secondary power input
Bit 3 => Presence of primary power input.
GROUNDING SCREW:
Please review “General Installation Chapter”, pt. 7 for more information.