Hanna Instruments HI 91610C - Manual (Page 9)

17 16
RANGE
°C
RANGE
PRINTING/RECORDING WITH HI 9161
To print the measured values press PRINT.
Each printout provides the following informa-
tion:
a – Current sample number
b – Date (DD-MM-YY)
c – Time (HH.MM)
d – RH% value
e – Temperature value
RECORDING AT AN INTERVAL
Set the appropriate logging interval, the
press LOG to enter the recording mode. The
log number and the recording interval will
appear for a few seconds on the secondary
display to indicate the operational mode.
The meter will print the current measurements and with the indicated
printing interval thereafter until the ON/OFF key is pressed.
The printout provides the following information:
a – Curernt log number
b – Current sample number in that particular log
c – Date (DD-MM-YY)
d – Printing interval in minutes
e – Time (HH.MM)
f – RH% value
g – Temperature value
When the meter is in recording mode, LOG is
displayed on the secondary LCD with the
RH% value on the primary LCD.
PRINT
LOG
VIEWING RH%, TEMPERATURE, TIME, DATE & PRINT-
ING INTERVAL WITH HI 91610
To view the time press the TIME key. This also displays the printing/
logging interval.
To view the date, press the UP key when the LCD is displaying time.
To view RH% on the primary display press RANGE.
To view temperature on the primary display when in RH% mode,
press RANGE again.
If “----" is displayed, no probe is con-
nected or the probe cable is broken.
Note: The RH% value is displayed without any symbol on the
primary display. The temperature value is always displayed
together with the "°C" or "°F" symbol.
TIME
INTV
TIME
DATE
UP
<>
1 0 - 0 1 - 9 6
0 0 0 1 * 1 0 . 5 9
6 5 . 6 R H %
2 5 . 0 ° C
a
b
c
d
e
INTV LOG
LOG
1 0 - 0 1 - 9 6
- - 0 1 - - 0 0 0 5 M
0 0 0 1 * 1 1 . 0 5
6 5 . 6 R H %
2 5 . 0 ° C
<>
a
b
c
d
e
f
g