Hanna Instruments HI 91610C - Manual (Page 2)

3 2
Remove the instrument from the packing material and examine it
carefully to make sure that no damage has occurred during shipping.
If there is any damage, immediately notify your dealer.
Each meter is supplied complete with:
• HI 70604/2 RH probe with 2 m cable
• HI 762L/2 temperature probe with 2 m cable
• 5 paper rolls
• Batteries (4 x 1.5V AA)
• Instruction manual
• Rugged carrying case
Note: Save all packing material until you are sure that the
instrument functions correctly. Any defective item must be
returned in their original packaging together with the sup-
plied accessories.
PRELIMINARY EXAMINATION
Dear Customer,
Thank you for choosing a HANNA instruments
® product.
Please read this instruction manual carefully before using the instru-
ment.
This manual will provide you with the necessary information for the
correct use of the instrument, as well as a precise idea of its versatility.
If you need additional technical information, do not hesitate to e-mail
us at [email protected].
These instruments are in compliance with the
directives.
TABLE OF CONTENTS
WARRANTY .................................................................................. 3
PRELIMINARY EXAMINATION ........................................................ 3
GENERAL DESCRIPTION ................................................................ 4
FUNCTIONAL DESCRIPTION HI 9161 ............................................ 5
FUNCTIONAL DESCRIPTION HI 91610 .......................................... 6
FUNCTIONAL DESCRIPTION DISPLAY AND RH PROBE .................... 7
SPECIFICATIONS ........................................................................... 8
INITIAL PREPARATION ................................................................. 9
OPERATIONAL GUIDE ................................................................. 10
PRINTING/RECORDING WITH HI 9161 ........................................ 17
PRINTING/LOGGING WITH HI 91610 .......................................... 19
CALIBRATION ............................................................................. 24
DATA TRANSFER TO PC (HI 91610 only) .................................... 27
SELF-DIAGNOSTIC FUNCTIONS .................................................... 28
MEMORY ORGANIZATION (HI 91610 only) ................................. 28
BATTERY REPLACEMENT .............................................................. 29
PRINTER MAINTENANCE ............................................................. 30
ACCESSORIES ............................................................................. 32
CE DECLARATION OF CONFORMITY .............................................. 35
WARRANTY
All Hanna Instruments meters are warranted for two years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions.
The probes are warranted for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damages due to accidents, misuse, tampering or lack of prescribed
maintenance are not covered. If service is required, contact the dealer
from whom you purchased the instrument. If under warranty, report
the model number, date of purchase, serial number and the nature
of the failure. If the repair is not covered by the warranty, you will be
notified of the charges incurred. If the instrument is to be returned to
Hanna Instruments, first obtain a Returned Goods Authorization
Number from the Customer Service department and then send it with
shipment costs prepaid. When shipping any instrument, make sure it
is properly packaged for complete protection.
All rights are reserved. Reproduction in whole or in part is prohibited without the
written consent of the copyright owner, Hanna Instruments.