Hanna Instruments HI 91610C User Manual
Page 8
15
14
UP
DOWN
TIME
UP
DOWN
UP
TIME
ALT
RANGE
RANGE
Press the ALT and TIME keys simultaneously and the display will
show the previously memorized time with the printing interval
blinking on the secondary LCD.
Any interval can be selected from among 1, 2, 5, 10, 15, 30, 60,
120 or 180 minutes by using the UP and DOWN keys.
Store the selected interval by pressing TIME once more. The hour will
blink.
To select the hour, press the UP or DOWN keys (24 hour clock).
To store the hour press the TIME key again and the minutes will
blink.
Use the UP or DOWN keys to select the correct minutes.
Press the ALT and TIME keys together to exit this mode and memorize
the minute setting.
UP
TIME
ALT
RANGE
UP
DOWN
TIME
The time, date and printing interval are now stored in the memory
even when the meter or display are switched off.
Note: Each time the batteries are replaced, the settings will need to
be re-entered. This can be avoided by applying an external
voltage to the unit before replacing the batteries.
VIEWING RH%, TEMPERATURE, TIME, DATE & PRINT-
ING INTERVAL WITH HI 9161
When the instrument is turned on, the dis-
play enters the TIME mode.
To view RH% on the primary display, press
the RANGE key.
To view temperature on the primary display
with decimal point, press the RANGE key.
If “----" is displayed, no probe is connected or
the probe cable is broken.
Note: the RH% value is displayed without any symbol on the
primary display and with a "H" on the secondary LCD. The
temperature value is always displayed together with the "°C"
or "°F" symbol.
To view the current time and printing interval, press the INTV and
RANGE keys simultaneously.
To view the date, press the UP or DOWN keys.
INTV
TIME
INTV
RANGE
+
INTV
TIME
UP
DATE
DOWN