Hanna Instruments HI 84432 - Manual (Page 30)

30
• Press Start to begin the titration process.
• After the titration is started two animations will be shown on the upper right side of the
display to indicate that the pump and the stirrer are running. On the lower right side of the
display is shown the period of time since the titration has been started.
• After the titration is complete, the concentration value is displayed in the selected unit.
• Press Unit to change the display unit.
• Press LOG to record the concentration value into the instrument’s memory.
A message will be displayed for a few seconds indicating the amount of the free log space.
50 log samples can be recorded in the instrument’s memory. When the titrator free log space
is under 12% the message will be shown permanently.