Hanna Instruments HI 84432 - Manual (Page 15)

15
Press the function key to select the new option.
When enabled, a short beep is heard every time a
key is pressed or when the calibration can be
confirmed.
A long beep alert sounds when the pressed key is
not active or a wrong condition is detected while
in calibration.
Beep On
Press the corresponding function key to change
the language.
If the new selected language cannot be loaded,
the previously selected language will be reloaded.
If no language can be loaded at startup the
instrument will work in the “safe mode”. In “safe
mode” all the messages are displayed in English
and help information are not available.
Language
Press Select to view the firmware version, language
version, mV factory calibration date and time and
temperature factory calibration date and time.
Press ESC to return to the Setup mode.
Meter information