Hanna Instruments HI 4321 - Manual (Page 52)

52
• Press to enter log interval edit menu and use
or to adjust the logging start-stop time or the log
sampling. Press to save the current value and use
or to adjust next / previous parameter.
• Press to exit log interval edit menu and then press
to save the current log.
• While the instrument is saving the data, a “Please wait...”
pop-up message will be displayed on the LCD.
LOGGING MODE 2
This logging mode can be used for multiple samples measurement.
By choosing this logging mode,
and will be
available in Measure mode.
To log data using this mode:
• Press
while in Measure mode to start the logging
session. When the measured value is frozen on the LCD by
pressing
and the stability criterion is reached, the
logged value is the one that has been frozen on the LCD until
returning to normal logging mode by pressing
.
The “Logging” and “AutoHold” indicators will be displayed on
the LCD.
• To store another frozen value, press again.
• To stop the logging session, press .