Hamilton Buhl FlashSign Software - Manual (Page 26)

26 / 26
Once the bracket has been positioned on the wall with the metal pegs facing towards you,
carefully place the back of the unit into these pegs and bottom protruding metal piece, and push down
gently to lock it into place.
Remember to attach the female socket into the bottom of the unit before you attach the unit
to the bracket otherwise it may be difficult to do it after the unit is affixed to the bracket.
Do not plug into the mains power until after the unit has been affixed to the bracket.
Then tighten the screw located at the bottom of the unit in the card compartment (the same one
which was loosened to remove the bracket from the player).
The player is now locked into the bracket and secured against theft of the unit.
You can now connect the plug to the mains power and operate the unit.