Device name, Status bar – Hall Research UHBX-3S User Manual

Page 9

UHBX-3S

2.5. Device Name

Assigns a descriptive name to the UHBX-3S device that is a maximum 8 characters long.

This information is stored in the device. Assigning unique Device Names to each device

can be useful to positively identify each device. This can prove handy if you are going to

upload different configurations for each device, or if you

intend to connect multiple devices simultaneously to a PC

and use the software to control several at once.
The FACTORY DEFAULT name is USBDEVHR.

2.6. Status Bar

The bottom bar of the screen shows the USB connection status as follows:
This indicates the software has not detected any

UHBX-3S devices and is searching the USB ports

for devices.
All controls and status are disabled until a valid UHBX-3S device is attached and properly

identified by the software.
The number of UHBX-3S devices will be shown; once, they

are connected to the PC.