Controls – Hall Research UHBX-3S User Manual

Page 6

UHBX-3S Software Guide

2.3. Controls

The UHBX-3S Manager provides you more control and flexibility of the device than the

front panel.

The UHBX-3S creates an EDID table that the source connected to the input can read.

EDID mode can be set to either emulate or pass-thru.

Video EDID



Emulate - The internally stored EDID is

passed to the source. This EDID can be a

factory default or a learned EDID from one

of the sink LCD monitors or other device

connected to an output.



Pass-thru - The EDID passed to the source

comes from a sink LCD monitor connected to an output.

EDID Routing Modes

An EDID can be learned from a sink LCD monitor

connected to any outputs. Once, an output is

selected, just click the Learn button to learn the

EDID from the connected monitor or device.

Learn EDID

The UHBX-3S’s output can be referenced

by a number from 1 to 99, which makes

communicating to a desired remote serial

receiver easier when there are more than

one UHBX-3S devices connected in daisy

chain.

Set RS232 Start Channel