Hall Research UHBX-3S - Manual (Page 3)

1
© Copyright 2014. Hall Research, Inc.
All rights reserved.
UHBX-3S
1. Windows™ Software Installation
1.1. General
The UHBX-3S graphical user interface (GUI) is Windows™ software used to configure
advanced settings of the UHBX-3S. Use of the software requires USB connection of the
PC to the device. For convenience, a USB cable is provided with each device.
The GUI can be used to monitor and configure several devices simultaneously. So for
PC's that have multiple USB ports or with the use of external USB hubs, it is possible to
use the same GUI and address each device individually.
1.2. Installation Prerequisites
• A PC with Windows XP™ OS or later
• USB port
• Microsoft™ .NET Framework 2.0 or later (most recent OS including Windows 7 and
8 typically include this and no action is required). If .NET Framework 2.0 or later is
not installed on your PC, the Microsoft™ website has free downloads available.
1.3. Software Installation
• If an earlier version of this particular software was previously installed, UNINSTALL
the program first from either the Add/Remove Programs section of the control panel
or by running the previous installation SETUP.EXE and selecting “remove
application”.
• Install the software by executing the SETUP.EXE program from the installation
source directory
• Accept the default settings, but if you want to specify a particular installation
directory other than the default, you may do so.
• Once the UHBX-3S software installation has completed, either
click the desktop icon or navigate the Start Menu to
Start  Programs  Hall Research  UHBX-3S Manager