Glow-worm 30ci Plus - Manual (Page 9)

9 4000123944-2
Programmer instructions for use
Setting the time.
Make sure there is an electrical supply to the boiler and the
boiler is switched ON ( I ).
Press button four times, is displayed and the time
will flash, press - or + to set the correct time (24hr clock).
Setting the day.
Press button five times, is displayed and the
current day setting will flash, press - or + to set the correct day.
1=MON, 2=TUE, 3=WED, 4=THU, 5=FRI, 6=SAT, 7=SUN
Setting the programmer.
Press button six times, is displayed.
press "+" and , and the will be
displayed along with 0 to 24 hour ON / OFF settings and 1 to 7
days of the week.
Set ON / OFF times at 30min intervals for each day 1 to 7 of the
week.
A flashing square is displayed below the current day of the
week selected, Press - or + to select the day 1 to 7 to be set.
Press to set ON / OFF times, and are
displayed, a flashing square will now be displayed below the 0
along the top of the display along with the corresponding time
00:00
OFF
to the right of the display, this indicates that 00:00 to
00:30 is set to OFF, to set this to ON press + , or to set
to OFF press - , continue setting the ON / OFF times
for the remainder of that day / 24hr period in 30min intervals.
Press , and is displayed, press + to select
the next day or - to select the previous day to be set, continue
setting the remaining days as required.
The display will default to normal after 60 seconds if no buttons
are pressed.
11530
11536
11537
11538
11539