Glow-worm 30ci Plus - Manual (Page 21)

21 4000123944-2
10 Horizontal Telescopic Rear Flue Installation
10316
Diagram 10.8
RESTRICTOR
FLUE
HOOD
10316
Diagram 10.7
SEAL
Diagram 10.6
9741
POWER
SUPPLY
LEADS
EARTH
LEAD FAN RETAINING
BOLTS
TWIST ANTI-CLOCKWISE
& LOCK AT 90
O POSITION
NOTE: Please check orientation
when engaging bayonet spigot
FAN
Diagram 10.5
10.3 Fan Removal, refer to diagram 10.5
• Disconnect power supply leads and earth lead from fan.
• Unscrew and remove the two fan retaining bolts.
• Ease the fan down and forwards to remove.
10.4 Flue Connection, refer to diagram 10.6
Pull the flue assembly into the spigot bayonet connection and
twist anti-clockwise to lock.
10.5 Flue Hood Outlet Restrictor, refer to
diagram 10.8
Secure restrictor, supplied with flue pack, to the flue hood as
shown in diagram 10.8.
10.6 Fan Securing, refer to diagram 10.5
Ensure fan outlet seal is in position, see diagram 10.7, then fit
the fan into the flue duct and secure to the flue collector with
screws previously removed.
Replace chamber cover and secure with screws previously
removed.