EXFO iOLM - Manual (Page 81)

Managing Test Configurations
intelligent Optical Link Mapper 75
Modifying a Test Configuration
6. Enable the Apply pass/fail option to access the parameters, and
modify them as needed. You can add, edit, and delete the custom
element by tapping on the custom element. For steps to modify or
create custom elements, see Managing Custom Elements (Optional,
iOLM EXpert Mode Only) on page 63.
Note: The pass/fail thresholds of the custom elements can only be edited when
the iOLM EXpert option is activated.
Note: The available wavelength choices depend on the iOLM module.
7. Tap OK to save the changes and close the window, or tap Cancel to
exit without saving.
Select Apply to all wavelengths to display the common threshold values
for all the wavelengths. If any threshold has different values for its
wavelengths, then the cell will be empty.
Tap Revert to Factory Settings to remove all the changes and apply the
default values associated with the selected configuration.