EXFO iOLM - Manual (Page 53)

Managing Test Configurations
intelligent Optical Link Mapper 47
Selecting a Test Configuration
3. Select the test configuration file.
Note: If you have selected any measurement where 2:N is available, then it is
displayed as Read Only mode in the Test Configuration Selection dialog
box even if the iOLM EXpert option is not activated
Note: Tap on the column to sort the column in ascending or descending order. By
default, the configuration list will be sorted in ascending order according to
the Name column.
4. Select the test configuration from the list of available choices.
5. Tap OK to apply the configuration and close the window, or tap Cancel
to exit without applying changes.
Name of the identifiers present in the
file. When more than one identifier is
present, they will be separated by a
semicolon.
Split ratio which is defined for
each stage of the splitter
defined. When more than one
splitter is defined, they will be
separated by a semicolon.
Configuration files which are
not PON are indicated by "---”.
Name of the
configuration
file.