Ftb-7300e, Technical specifications, Intelligent optical link mapper – EXFO iOLM User Manual
Page 175: General specifications
Technical Specifications
intelligent Optical Link Mapper
169
FTB-7300E
FTB-7300E
TECHNICAL SPECIFICATIONS
Model
FTB-7300E
a
Wavelength (nm)
b
1310 ± 20/1490 ± 15/1550 ± 20/1625 ± 10/1650 ± 7
Dynamic range at 20
+s (dB)
c
39/38/37/39
d
/37
Event dead zone (m)
e
0.8
Attenuation dead zone (m)
e
4/4.5/4.5/4.5/4.5
Distance range (km)
1.25, 2.5, 5, 10, 20, 40, 80, 160, 260, 400
Pulse width (ns)
5, 10, 30, 50, 100, 275, 500, 1000, 2500, 10 000, 20 000
Linearity (dB/dB)
b
± 0.03
Loss threshold (dB)
0.01
Loss resolution (dB)
0.001
Sampling resolution (m)
0.04 to 5
Sampling points
Up to 256 000
Distance uncertainty (m)
f
± (0.75 + 0.001 % x distance + sampling resolution)
Measurement time
User-defined (60 min. maximum)
Typical real-time refresh (Hz)
4
Stable source output power (dBm)
g
–2.5
Reflectance (dB)
b
± 2
GENERAL SPECIFICATIONS
Size (H x W x D)
97 mm x 25 mm x 260 mm (3
13
/
16
in x 1 in x 10 ¼ in)
Weight
0.55 kg (1.2 lb)
Temperature operating
storage
0
o
C to 50
o
C (32
o
F to 122
o
F)
—40
o
C to 70
o
C (–40
o
F to 158
o
F)
Relative humidity
0 % to 95 % non-condensing
For complete details on all available configurations, refer to the Ordering Information section.
Notes
a. SM Live port built in filter’s bandpass 1625 nm ± 15 nm/1650 nm ± 7 nm.
b. Typical.
c. Typical dynamic range with a three-minute averaging at SNR = 1.
d. Non-SM Live 1625 nm dynamic range is 37 dB.
e. Typical dead zone of singlemode modules for reflectance below –45 dB, using a 5 ns pulse.
f. Does not include uncertainty due to fiber index.
g. Typical output power value at 1550 nm.
All specifications valid at 23º C ± 2º C with an FC/PC connector, unless otherwise specified.