EXFO OTDR 2 - Manual (Page 156)

Creating and Generating Reports
148 OTDR
Adding Information to the Test Results
To add information to the test results:
1. From the Main Menu, tap Identification.
2. Select either Current Acquisition or Next Acquisition from the Apply
to list.
3. Enter the desired information. For more information, see Naming
Trace Files Automatically on page 18.
Note: The information in the Serial Number, Model Number, and Calibration
Date boxes is provided by the application and cannot be edited.The
Wavelength(s), Pulse(s), and Duration(s) cannot be edited in the
identification window but can be set before taking an acquisition in the
OTDR tab.
4. Tap OK to return to the trace display.
The information entered is saved with the trace and can be viewed or
changed at any time using the same process.