EXFO OTDR 2 - Manual (Page 155)

OTDR 147
9 Creating and Generating
Reports
For future reference, you can add notes on the location of the tested fiber,
type of job performed and general comments related to a trace in trace
reports.
Adding Information to the Test Results
Before or after acquiring a trace, you might want to include or update
information about the tested fiber and job or add comments. The
information you enter is saved for the currently open trace file or the next
acquisition depending on your choice.
The information is common to all wavelengths (location A and B, cable ID
and fiber ID, etc.). If you clear information from the Identification window,
all information will be deleted.