EXFO LFD-200 Live Fiber Detector - Manual (Page 15)

LFD-200 10
3 Maintenance
To help ensure long, trouble-free operation:

Always inspect fiber-optic connectors before using them and clean them if
necessary.

Keep the unit free of dust.

Clean the unit casing and front panel with a cloth slightly dampened with water.

Store unit at room temperature in a clean and dry area. Keep the unit out of
direct sunlight.

Avoid high humidity or significant temperature fluctuations.

Avoid unnecessary shocks and vibrations.

If any liquids are spilled on or into the unit, turn off the power immediately,
disconnect from any external power source, remove the batteries and let the
unit dry completely.
To clean detector ports:
1. If the detector is dusty, blow dry with compressed air.
2. Being careful not to touch the soft end of the swab, moisten a cleaning tip with
only one drop of isopropyl alcohol.
3. While applying light pressure (to avoid breaking the detector window), gently
rotate the cleaning tip on the detector window.
4. Repeat step 3 with a dry cleaning tip or blow dry with compressed air.
5. Discard the cleaning tips after one use.
W
ARNING
Use of controls, adjustments, and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure.
I
MPORTANT
Alcohol may leave traces if used abundantly. Do not use bottles that
distribute too much alcohol at a time.