EXFO LFD-200 Live Fiber Detector - Manual (Page 10)

Introducing the LFD-200 Live Fiber Detector 5
The LFD-203 Live Fiber Detector is supplied with three adapter heads.
The adapter heads for the LFD-203 model have an indexing notch, which is part of
the ambient-light-reduction design.
Power Source
The Live Fiber Detector is powered by a 9 V alkaline battery.
When the battery voltage becomes low, the LOW BAT LED illuminates (LFD-201 and
LFD-203 models) or
Lb appears on the display (LFD-202 and LFD-202P models).
The unit will continue to operate for some time, but the battery should be replaced
with a fresh 9 V alkaline battery as soon as possible (see Replacing the 9 V Battery
on page 11).
Indexing notch
Deep-slot adapter head to be
used with a jacketed ribbon
fiber of up to 12 counts.
Shallow-slot adapter head
to be used with a bare
ribbon fiber of up to 12
counts.
Slotted adapter head to be
used with a 3 mm or a 2 mm
jacketed fiber (that is, pigtails
and jumpers) or a loose tube
fiber.
Indexing notch Indexing notch