EXFO FTB-1 - Manual (Page 75)

Setting Up Your Unit
FTB-1 65
Selecting the Startup Application
Selecting the Startup Application
The first time you start your unit, Mini Toolbox is displayed. However, you
can configure your unit to automatically start in any of the available
applications.
The selected application or applications will start automatically the next
time you turn on your unit after a shutdown (not in standby or hibernate
mode). For more information, see Turning On or Off the Unit on page 29.
If you want to configure your unit to start the TightVNC server automatically
at startup (for remote control), see Working With TightVNC on page 164.
If the specified application cannot be started (for example, the required
module is not present in the unit), Mini Toolbox is started automatically.
You will have to select the application again when the module is inserted
into the unit.
To select a startup application:
1. From the Main Menu, tap System Settings.
2. From System Settings, tap Startup Applications.