EXFO FTB-1 User Manual

Page 130

Text mode
Original mode

Inspecting Fibers with a Probe

120

FTB-1

3. If the unit prompts you to select an application, tap the button

corresponding to the probe that you want to use to start the
corresponding application.

Note: If you have not updated the ConnectorMax product lately, the

ConnectorMax2 application may not be installed on your unit. In this case,
you will not be presented with a choice of applications. The ConnectorMax
application will start automatically, enabling you to work with the probes
of the FIP-400 series. If you also wish to be able to work with probes of the
FIP-400B series, you will need to install the most recent ConnectorMax kit.

Note: You can access the online help by tapping the

button from the

ConnectorMax or ConnectorMax2 application.