Eurocom X3 - Manual (Page 161)

Upgrading The Computer
6 - 8 Upgrading the Optical Device
6
Upgrading the Optical Device (Model B)
1. Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.
2. Locate the HDD/ODD bay cover and remove screws - .
3. Slide the cover in the direction of arrow , until the case markers line up.
4. Remove the HDD/ODD bay cover
5. Remove the screw at point , and use a screwdriver to carefully push out the
optical device.
6. Reverse the process to install any new optical (CD/DVD) device (make sure you
slide on the cover and align the markers when replacing the HDD/ODD bay cover).
Figure 6 - 4
Removing the
Optical (CD/DVD)
Device
Model B
1 3
4 5
6
7
1
2 3
5
6
5
7
4