Eurocom X5 R2 - Manual (Page 208)

Modules
7 - 14 PC Camera Module
7
Camera App
1. Run the Camera app from the Start screen by clicking on the Camera app icon
.
2. The camera interface will display two buttons on the right side of the screen.
3. The upper button is used to record video, and the lower button is used
to take still pictures.
4. Right-click on the screen to bring up menu buttons at the bottom of the screen.
5. These buttons enable you to access the camera roll (where captured pictures and
video are displayed), set the timer (the time period before capture begins; 3
seconds, 10 seconds or Off) and set the exposure level using the slider to obtain
the best results.
Figure 7 - 7
Camera App
Buttons

Exposure
Use the slider to adjust
the Exposure level.
Figure 7 - 8
Camera Options