Eurocom W3x0ET Shark - Manual (Page 193)

Modules
Intel® Rapid Storage Technology Driver 7 - 61
7
Intel ® Rapid Storage Technology Driver
Install the Intel® Rapid Storage Technology to support your SATA drive if set up
in AHCI mode in the BIOS (see
“SATA Mode (Advanced Menu)” on page 5 - 9 )
or if you have set up your hard disks in a RAID configuration (see “Setting Up SATA
RAID or AHCI Mode” on page 7 - 2 ).
1. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/
DVD drive.
2. Click Option Drivers (button).
3. Click 8.Install IRST Driver > Yes.
4. Click Next > Next > Yes > Next > Next.
5. Click Finish to restart the computer (you will need to restart the system
again after the computer has rebooted).
If you have a Solid State Drive (SSD) installed in your secondary hard disk drive
bay you may configure Intel® Smart Response Technology for your system (see
over).