Elenco 30MHz Dual Trace - Manual (Page 6)

3
General
OSCILLOSCOPE INSTRUCTION MANUAL
DESCRIPTION
The model PS-XX0/XX1/XX5 oscilloscope is a dual-channel oscilloscope with
frequency bandwidth 20~100 MHz at -3dB; maximum sweep 10 nS/DIV; maximum
sensitivity 1 mV/DIV and 150 mm rectangular CRT with internal graticule.
The oscilloscope is rugged, easy to operate and highly reliable. It also provide many
convenient feature and special functions which make itself be an special for
research, production , education, and development in electronic device or circuitry.
FEATURES
(1) Ease of Operation
All control and function switches are laid out in the most convenient locations
making the oscilloscope extremely easy to operate.
(2) High Input Impedance
The input impedance of CH 1, CH 2 IS 1M Ω ± 2%, 25 pF ± 10pF.
(3) Variable Hold Off Function
Signals with complex repeating periods which resist triggering can be stably
triggered with a simple adjustment of the hold off level.
(4) X-Y Operation
CH 1 can be applied as horizontal deflection (X-axis) while CH 2 provides vertical
deflection (Y-axis).
(5) Trigger l of TV Sync
The oscilloscope has a sync separator circuit, which allows triggering for TV-H and
TV-V signal.
(6) High Sensitivity
1 mV/DIV maximum vertical sensitivity.
10 nS/DIV maximum sweep rate.
(7) Sweep Mix Function (PS-XX5 only)
The main sweep and the delay sweep can be viewed at the same time.
(8) CH 2 Output (PS-XX5 only)
CH 2 output which on near panel can be connected to frequency counters and other
modulation signal.