頁面 25, Component test( xx1, xx5 only), Ch2 output(xx5 only) – Elenco 30MHz Dual Trace User Manual
Page 25: Other specifications

COMPONENT TEST( XX1, XX5 only)
Test Voltage: Max. 8.6Vrms (open circuit)
Test Current: Max. 11mA (shorted)
Test Frequency: Line Frequency.
Components: Capacitor, Inductor, Diode, Transistor, Zener etc.
CH2 OUTPUT(XX5 only)
Output Level: 100mV / DIV(no load); 50mV / DIV(with 50Ω load).
Bandwidth: 20Hz~20MHz(-3dB)
Calibrator: Square wave about 1 KHz, 2Vp-p±3%
OTHER SPECIFICATIONS
Power Source: 115V/230V±10%, AC 50/60Hz
Power Consumption: Approx.50 Watts.
Dimensions: 324(W) x 398(D) x 132(H)mm(12.8”x15.7”x5.2”)
Net Weight: Approx. 7.6kg
Rated Range of Use: 10 C~35 C, 10~80% RH
Limits of Operation: 10 C~50 C, 10~80% RH
Storage Environment: -30 C~70 C, 10~90% RH
Graticule Illumination: A d j u s t a b l e ( X X 1 , X X 5 o n l y )
Z-Modulation:(XX5 only)
Positive TTL signal, low level blank intensity at any intensity, high level un-
blank any intensity.
Trace Rotation: Adjustable on front panel.
°
°
°
°
°
°
22
100MHZ SPECIFICATIONS