Elenco Snap Circuits® Home Learning - Manual (Page 33)

-32-
Cut the math disc and paper pointer from page 44.
Attach the math disc to the fan blade.
Bend and attach the pointer to the speaker so it sticks up over the math disc as shown above.
Each player uses a pencil and paper to keep score on a sheet of paper or note pad. Start with all of the players at zero score.
Each player gets a turn to press the switch, which will cause the disc to spin. Release the press switch. When the disc stops
turning the paper pointer will be pointing to a wedge with a number on it. In each game below first player to reach or exceed 100
wins.
SIMPLE MATH: Add number to your score and the turn moves to the next player.
EASY MATH: Add white and blue numbers to your score but subtract red numbers from your score. Turn ends
MIDDLE MATH: Add white, subtract red, multiply score by blue. Turn ends.
ADVANCED MATH: Add white, multiply by red, divide score by blue. Only keep two decimal places.
If the pointer is pointing to a line instead of a wedge of color, add 9 to your score and spin again.
Materials List
2 2-Snap Wires
2 3-Snap Wire
1 4-Snap Wire
1 Battery Holder (B1)
1 Motor (M1) and Fan Blade
1 Press Switch (S2)
1 Speaker (SP)
1 Math disc cutout
1 Paper pointer cutout
1 Tape (not included)
1 Scissors (not included)
Build the circuit as shown. Place the
motor (M1) with the “+” side on the right.
POINTER
Cut these out from page 44
Activity 25
Math Game
(ST
ANDING)
1