Ditch Witch Zahn - Manual (Page 98)

R150/R230/R300 Operator’s Manual
Specifications - 97
Power Unit with Independent Auger Trencher
CMW
H Driving height 53.5 in 1.36 m
H1 Tie-down height 31.7 in 805 mm
H3 Maximum front end height 49.3 in 1.25 m
D1 Operating depth (maximum) 36 in 914 mm
W Width 36 in 914 mm
W2 Cutting width 4-8 in 102-203 mm
W3 Spoils width 16 in 406 mm
W4 Centerline of trench, left 18.5 in 470 mm
W5 Centerline of trench, right 17.5 in 445 mm
W7 Front end width 33 in 838 mm
A Angle of departure 25° 25°
A2 Front end travel down (recommended) 60° 60°
A3 Front end travel up (recommended) 50° 50°
Unit mass 1488 lb 674.9 kg
Front end mass w/24” boom and 4” cup tooth chain 440 lb 199.6 kg
Vehicle clearance circle (SAE) wall to wall
Right turn 11.3 ft 3.44 m
Left turn 10.5 ft 3.2 m
Headshaft Speeds @ 3600 engine rpm U.S. Metric
R150
Medium speed/medium torque 149 rpm 149 rpm
High speed/low torque 183 rpm 183 rpm
R230/R300
Low speed/high torque 186 rpm 186 rpm
Medium speed/medium torque 244 rpm 244 rpm
Power Train U.S. Metric
Digging chain drive: hydraulic direct drive
Digging chain: 33,000 lb or 35,000 lb
Spoils handling drive: hydraulic, independent
Chain drive sprocket: forged and tempered
Dimensions U.S. Metric