Ditch Witch Zahn - Manual (Page 4)

R150/R230/R300 Operator’s Manual
Overview - 3
Intended Use
CMW
Intended Use
The Zahn line consists of three versatile performers. The R150 is configured as a dedicated trencher. The
R230 and R300 units can be configured as dedicated trenchers or they can be configured with an
InterChange connection to allow them to accept a variety of front ends. Available interchangeable front
ends include a trencher, vibratory plow, dumper, tool carrier, backhoe, stump grinder and tiller. Contact
your Ditch Witch dealer for a complete list of available front ends.
The unit is designed for operation in temperatures typically experienced in earth moving and construction
work environments. Provisions may be required to operate in extreme temperatures. Contact your Ditch
Witch dealer.
Use in any other way is considered contrary to the intended use.
Zahn R150, R230 and R300 units should be used with genuine Ditch Witch front ends, attachments and
components. They should be operated, serviced, and repaired only by persons familiar with their particular
characteristics and acquainted with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.