500 hour – Ditch Witch Zahn User Manual
Page 78
R150/R230/R300 Operator’s Manual
Service - 77
500 Hour
CMW
500 Hour
Adjust Ground Drive Pump Neutral
(R230/R300 only)
Adjust neutral on ground drive pump every 500
hours or if spring is rusted or worn. Check
adjustment with throttle at low speed and
hydraulic fluid at operating temperature. Ensure
all neutral components are working properly
before adjusting.
To adjust
1.
Use a hoist or appropriate jack stands to
reaise unit until all tires are off the ground.
2.
Loosen bolts (1).
3.
Start unit and bring hydraulic fluid to
operating temperature.
4.
Adjust throttle to full speed.
5.
Disengage parking brake. Tires may turn.
6.
Slowly rotate cam (2) until tires stop.
7.
Tighten bolts.
8.
Engage parking brake.
9.
Shut down unit.
10. Lower unit to ground.
IMPORTANT: Tires may not come to a complete stop with unit raised. Adjust to achieve the least
tire movement possible.
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)