Start unit, R150, R230/r300 – Ditch Witch Zahn User Manual
Page 41
Drive - 40
R150/R230/R300 Operator’s Manual
Start Unit
CMW
Start Unit
R150
1.
Ensure all controls are in neutral and parking brake is engaged.
2.
Turn key to on position.
3.
Move throttle switch to center position.
4.
Choke engine, if necessary.
5.
Pull rope or turn ignition switch to start position and release when engine starts.
R230/R300
1.
Ensure all controls are in neutral and parking brake is engaged.
2.
Move throttle to half open.
3.
Choke engine, if necessary.
4.
Turn ignition switch to start position and release when engine starts. See “Ignition switch” on page 30.
EMERGENCY SHUTDOWN: Release all controls (including cruise control pedal) and turn ignition
switch to OFF
.
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)