Ditch Witch TK Series Manual - Manual (Page 41)

System Operation - 40
TK Series Guidance System Operator’s Manual
Locate
CMW
Locate
The tracker has two modes: walkover location and drill-to. Use walkover location to find the position of the
beacon. Once the tracker is in or near the beacon plane, view the depth, pitch, and roll position. In drill-to
mode, the tracker is placed along the intended bore path and provides steering corrections for the drilling
unit operator to drill that path.
Walkover Location
1. Locate arrows
2. Beacon pitch
3. Beacon depth
Item Description Notes
1. Locate
arrows Indicates direction to move tracker to locate beacon.
2. Beacon
pitch Displays pitch of beacon in percent grade or degrees.
3. Beacon
Depth Displays depth of beacon when beacon is properly
located.
e17om003w.eps
2
3
1