DaySequerra Eclipse LBR4 - Manual (Page 19)

LBR4
User
Manual
19
System
Menu
Figure 7. System Menu Screen Display
Navigating to the SYSTEM SETTINGS MENU from the Main Menu will allow additional values to be
adjusted in order to fine tune the operation of your LBR4.
Clock
Source
Defines which channel to sync the clock to. (Channels 1, 2, 3, 4, or Internal)
Sample
Rate
Displays the current sample rate for each channel (READ ONLY). If Internal is selected as a clock
source 44.1 kHz and 48 kHz are available to select from.
CH-­‐4
Input
Mode
Select ‘CH-4’ or ‘EAS’. Selecting ‘CH-4’ will put CH-4 in a normal state to process audio through the
algorithm like CH-1, 2, and 3. While CH-4 Input mode is set to ‘CH-4’, EAS Override, EAS Detection
and EAS Program Return Delay are not selectable.
Selecting ‘EAS’ will prepare CH-4 for an EAS signal. EAS Override, EAS Detection and EAS Program
Return Delay are selectable when the input mode is set to ‘EAS’ in Auto Detect mode.
(If
CH-­‐4
is
selected
for
CH-­‐4
Input
Mode
then
the
HOMESCREEN
will
display
'OFF'
as
Read-­‐Only.
If
EAS
is
selected
for
CH-­‐4
Input
Mode
then
the
Homescreen
will
display
'ON'
as
Read-­‐Only.)