DaySequerra Eclipse LBR4 - Manual (Page 13)

LBR4
User
Manual
13
Rear
Panel
AUDIO
INPUT
AND
OUTPUT
INTERFACE
• Balanced Digital AES via DB-25 TASCAM format
cable
INPUTS
• 4 AES-3 PCM inputs for independent 2.0 stereo
• 1 AES-3 PCM input for EAS/CAP
OUTPUTS
• 4 AES-3 PCM outputs for independent 2.0 stereo
GPIO – A Female DB-9 connection that allows Auto-Daypart to automatically change operating profiles.
Opto-isolated inputs is triggered by a voltage of 5VDC
DB-9 Female Port
on LBR4 Rear Panel
Output 1: Relay 1 is Normally Open. Upon any AES error, clock error, or channel loss this relay
will close. When the failure is remedied, the relay will open.
Output 2: Relay 2 is Normally Open. Upon a hardware failure such as a power supply failure or
DSP usage > 85% will cause this relay to close. When the failure is remedied, the relay will
open.
Pin Signal
1 Output Relay 1 N.O.
2 Relay 1 Common
3 Optical Input 1
4 Optical Input 2
5
Optical Input
Common
6 Output Relay 2 N.O.
7 Relay 2 Common
8 Optical Input 3
9 Optical Input 4