DaySequerra NLC5.1ST - Manual (Page 22)

22
NLC5.1ST User Manual
System Menu
Navigating to SYSTEM MENU from the main menu will allow adjustment of I/O audio handling, network
settings, diagnostics, alarm settings or information on the unit.
I/O Menu
The I/O Menu will allow you to tailor NLC5.1ST to suit your specific audio processing application.
Audio Input: Navigates to the audio input configuration sub-menu.
5.1 Output Mode: Determines if the 5.1 signal flow is subjected to loudness control. When set to In-
Line, loudness control processing is performed. If set to Bypass, loudness processing is not performed
for this signal flow. (Default: In-Line)
ST Output Mode: Determines if the auxiliary stereo signal flow is subjected to loudness control. When
set to In-Line, loudness control processing is performed. If set to Bypass, loudness processing is not
performed for this signal flow. (Default: In-Line)
Final Limiter: Enables and disables the final limiter. (Default: Enabled)
Final Limiter Ceiling: Allows NLC5.1ST to reduce the level of output stream (0dB to -20dB)
GPI 3 Preset Load: Determines which loudness control parameter preset is loaded when voltage is
detected on GPIO input 3. (Default: Light)
GPI 4 Preset Load: Determines which loudness control parameter preset is loaded when voltage is
detected on GPIO input 4. (Default: Medium)
System Menu Screen
I/O Menu Screen