Installation audience, General requirements, Installation audience -2 general requirements -2 – Datacard Group ImageCard SelectTM and UltraGrafix SelectTM Printers User Manual
Page 76

6-2
Before you install
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Installation audience
To perform the procedures in the installation section of this guide, you need the
following skills:
•
Ability to read and understand written and graphical instructions
•
Experience and comfort installing hardware (such as a printer, scanner, expansion
card, etc.) in a personal computer (PC)
•
Experience with configuring applications and ports
•
Experience installing and using Microsoft® Windows® 98, Windows Me, Windows
NT®, or Windows 2000 (for Windows NT and Windows 2000, the installer must
have administrator access to the PC)
•
Ability to perform simple troubleshooting using written and graphical instructions
If you do not feel comfortable with installing the printer, find a network support or other
technical professional to install the printer.
Datacard-authorized service personnel also use this information.
General requirements
When choosing a site for the Select printer and its supplies, consider the following
general requirements:
•
Keep all dust, dirt, food, liquids, etc. away from the Select printer at all times.
•
Keep the top cover closed at all times, except when changing supplies, fixing
problems, or performing maintenance.
•
Do not use supplies or cards that have been dropped on the floor or have
otherwise become contaminated.
•
Keep paper and foreign materials off the Select printer.
•
Do not block the back air vents or fan opening on the Select printer.
•
Place the Select printer on a stable platform; keep it off the floor.
•
Place the Select printer away from direct sunlight.
•
Place the Select printer away from heating ducts, blowers, or other air vents.
•
Do not use the Select printer for purposes other than its intended use.
•
When cleaning around the Select printer, prevent debris from entering the printer.
•
Place the Select printer in a clean office environment, protected from any type of
construction.
•
Store all supplies (ribbons, cards, etc.) in the original packaging until loaded in the
cartridges. Keep the original packaging closed.