Bonaire Ducted RAC Inverter - Manual (Page 29)

Page 29
COMMISSIONING
Ductwork
Ductwork is sized to manufacturers specifications
All ductwork is completed to plan, correctly supported, airtight, without crushed sections or excessively
tight bends
Air distribution checked, dampers are adjusted and all outlets correctly adjusted and wiped clean.
Any roof penetrations are fully sealed and watertight.
Roof access panel cover has been refitted.
Site
All rubbish has been removed from inside and on the roof.
Customer Hand Over
The operation of the Controller is demonstrated
How and when to remove and clean the return air filter
Maintenance requirements
Commission sheet, owner’s manual and certificates of compliance given to the customer.