Bonaire Ducted RAC Inverter - Manual (Page 11)

Page 11
OPERATION
OPERAT IO PN
Classic Wall Control Operating Instructions
Button Functions
ON / OFF Button
1. When the system is off, press the ON/OFF button to turn on the wall controller. The power light will be
lit and the LCD screen will display the current system settings.
2. When the system is on, the wall controller will go to standby after pressing the ON/OFF button. The
LCD screen will display the time (if the display timer has been set). If the unit does not operate within 5
seconds, the LED backlight will switch off along with any other displays.
When the ON/OFF button is pressed to change the status from ON to OFF, the wall controller will send
a signal 5 seconds later. If the wall controller power supply is disconnected and then reconnected
again, the wall controller will resume operation based on the settings used prior to power failure.
MODE Button
When the unit is running, the MODE button on the wall controller can be pressed. The mode will then be
changed according to the following order:
DEHUMIDIFY AUTO COOL HEAT FAN