Bonaire Ducted RAC Inverter - Manual (Page 21)

Page 21
OPERATION
TIMER operation
When the SLEEP operation is selected, the room temperature is automatically controlled with the elapsed
time so that the room isn’t too cool during the cooling cycle or too warm during the heating cycle.
•
During COOL and DRY modes: The present temperature is raised by 1°C in 1 hour (when the timer is
set) and raised 2°C in 2 hours. The temperature wil l then stabilise.
•
During HEAT mode: The present temperature is lowered by 1°C in 1 hour (when the timer is set) and
lowered 2°C in 2 hours. The temperature will then s tabilise.
FAN SPEED
The fan capacity of the air conditioner can be selected by your choice during the heating or cooling cycles.
Operation Fan speed
Automatically set by the microcomputer AUTO
Powerful operation with high capacity HI
Standard operation MED
Minimal Capacity LO
Power-off memory function
When the air conditioner is disconnected from the power supply and the unit is restarted, the air conditioner
will operate at the mode it was set in prior to power failure.
Remote controller handling procedure
Battery replacement procedure
The following signifies flat batteries. Replace the dead batteries with new ones
•
Receiving sound is not emitted from the unit when the signal is transmitted
•
Indicator becomes indistinct