Avalue ECM-LX800D - Manual (Page 52)

ECM-LX800D
52 ECM-LX800D User ’s Manual
3.5.5.2 Power Management Setup
The Power Management Setup allows you to configure you system to most effectively save
energy while operating in a manner consistent with your own style of computer use.
3.5.7.1 ACPI Suspend Type
This determines the ACPI suspend type.
The choices: S1(POS), S3(STR)
3.5.7.2 Power Management
This category allows you to select the type (or degree) of power saving.
The choices: Disabled,Legacy, APM, ACPI
3.5.7.3 HDD Power Down
This item controls how long a hard disk must be left idle before it spins down.
The choices: Disabled, 1,5,10,15,30,45 Sec., 1,5,10,15,30,45,60,90,120 Min.
3.5.7.4 MODEM Use IRQ
This determines the IRQ in which the MODEM can use .
The choices: N/A, 3, 4, 5, 7, 9, 10, 11.
3.5.7.5 PME Event Function
This determines whether to enable the PME Event wake up function or not.
The choices: Disabled, Enabled.
3.5.7.6 Soft-Off by PWR-BTTN
This determines to use power saving mode or not. When set to Delay 4 Sec, this function
allows the power button to put the system in suspend, a power saving mode; otherwise, the
computer turns completely off when the power button is pressed by setting as Instant-Off.