Austin Hughes MCS - Manual (Page 7)

UM-CV-751-MCS-Q114V1 www.austin-hughes.com
1) CAN Bus Registry
• Function
The computer registers the MCS module of LCD display(s) to CAN bus daisy chain connection.
*Registration requires when add or remove the LCD displays from the CAN bus connection.
Header Command ID Val 1 Val 2 Val 3 Val 4 Val 5 Val 6
Checksum
Footer
0x06, 0x4D,0x43 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0D, 0x0A
• Register MCS Module(s)
MAC1 : The 1st byte of MAC address for the LCD display
MAC2 : The 2nd byte of MAC address for the LCD display
MAC3 : The 3rd byte of MAC address for the LCD display
MAC4 : The 4th byte of MAC address for the LCD display
ERR : Error code that shows the type of error that occurred
0x10 Display controller error
0x11 Serial controller error
0x12 Unsupported Command
0x13 Checksum error
0x14 Bad parameter
0x15 Unknown error
Header Command
ID
Val 1 Val 2 Val 3 Val 4 Val 5 Val 6
Checksum
Footer
0x4D, 0x43,0x06 0x01 MAC1 MAC2 MAC3 MAC4 0x00 0x00 0x0D, 0x0A
• Ack
Header Command
ID
Val 1 Val 2 Val 3 Val 4 Val 5 Val 6
Checksum
Footer
0x4D, 0x43,0x15 0x01 ERR 0x00 0x00 0x00 0x00 0x00 0x0D, 0x0A
• Nak
< 2.1 > Detailed Description of Commands
P.5