Daewoo K3050MECHA User Manual
Page 29
28
Fig. 5-1 THE SCHEMATIC DIAGRAM OF TAPE TRANSPORTING SYSTEM
When the parts as shown in Fig. 5-1 are replaced, the TAPE TRANSPORTING SYSTEM has changed. To
prevent this, it is essential to know thoroughly and observe the following INSTRUCTIONS.
A. ADJUSTMENT OF THE S/T GUIDE ROLLER
a. Play back a T-120 TAPE.
b. Make sure that excessive TAPE wrinkle does not occur at each S/T GUIDE ROLLER.
c. If TAPE wrinkle is observed at the S/T GUIDE ROLLER, adjust them so that no wrinkle occurs.