ADLINK Hurricane-QM57 - Manual (Page 7)

TME-EPIC-HURQM-R2V9 Revision 2.9 Page 1 of 74
1
Overview
1.1
Introduction
The Hurricane-QM57 offers a high performance EPIC board with the i7-620UE, i7-610E and Celeron P4505
Processor Series from Intel ® Core™. This processor is a next generation of 64-bit, multi-core mobile processor
built on 32-nanometer process technology. Based on the low-power/high-performance Nehalem micro-
architecture, the Arrandale processor is designed for a two-chip platform as opposed to the traditional three-
chip platforms (processor, GMCH, and ICH). The two-chip platform consists of a processor and the Platform
Controller Hub (PCH) and enables higher performance, lower cost and easier validation. In this case the PCH is
Intel’s Ibex Peak-M (Mobile Intel® 5 Series Chipset).
Two Ethernet GbE ports, six USB 2.0 host ports and two Power-USB 2.0 host ports handle the communication
with external devices. Four SATA ports allow connection of hard disk or CD drives.
System expansion can easily be realized over PCI/104-Express, PC/104-Plus, I²C bus and Mini-PCI connectors.
The Hurricane-QM57 runs DOS, Windows and Linux operating systems.
Features
CPU
 Intel Arrandale™
 Cache Memory with:
 32 KB/32 KB level 1 I/D caches
 256 KB level 2 I/D cache
 Up to 4 MB level 3 I/D cache
Main Memory
 soldered 1GB DDR3 RAM
Chipset
 Intel® 5 Series Chipset (formerly Ibex Peak-M)
Extension slots
 1 x PC/104-Plus Bus
 1 x PCI/104Express Bus
Interfaces
 4 x SATA
 6 x USB 2.0 ports
 2 x Power-USB 2.0 ports
 2 x Ethernet GbE
 SPDIF Out
 7.1 Audio
 MiniPCI-Express

DisplayPort
 18/24 Bit LVDS for displays
 MISC signals: external power button, external reset
button, I²C bus, 8 GPIOs, external HDD and Power
LED, LPC
 Power supply
 Lippert Enhanced Management Technology
(LEMT)
Other configurations are possible. Please contact your local LiPPERT representative to discuss requirements.