ADLINK cPCI-3510 Series - Manual (Page 25)

Specifications 11
cPCI-3510
2.2 cPCI-R3P00(T) RTM Specifications
Table 2-2: cPCI-R3P00(T) RTM Specifications
1. A DB-9-to-DB-9 dongle to convert the cPCI-R3P00 RS-422/485
pin definitions to common pin definitions is included in the package
(“COM5 Connector (DB-9)” on page 50).
Mechanical Board Size
• cPCI-R3P00: 100mm x 50mm
• cPCI-R3P00T: 100mm x 80mm
Dual-slot (8HP, 40.64mm)
(optional single slot upon request )
Gigabit
Ethernet • cPCI-R3P00: Two GbE ports switched from cPCI-3510 2x
independent controller i210
• cPCI-R3P00T: Two GbE ports from independent Intel
82580DB GbE controller
1
Serial Ports • Two serial ports on I/O panel from pin header
• One port converted from USB supporting RS-232/422/485
1
• One port provides Tx, Rx signals only
Storage
Interfaces • Three 7-pin Serial ATA ports
Faceplate I/O • 2x USB 2.0 ports
• 2x 10/100/1000BASE-T Ethernet ports
• Analog DB-15 VGA port
• 2x COM ports
NOTE: NOTE:
Specifications are subject to change without prior notice.