ADLINK cPCI-3510 Series - Manual (Page 141)

IPMI User Guide 127
cPCI-3510
OemDisableSmbus
This command is used to shut down I2C bus access.
OemDispDebugVariable
This command can report up to 5 interval values for debug pur-
poses. For developers only.
OemResetHost
This command is implemented to control the system’s status if
rebooting is required. Operators can control the system remotely.
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F3h OEM defined command
Response 0 Complete Code 00h means OK
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F4h OEM defined command
Response
0 Complete Code 00h means OK
1 *Debug variable 1
2 *Debug variable 2
3 *Debug variable 3
4 *Debug variable 4
5 *Debug variable 5
NOTE: NOTE:
*Reserved for customized IPMI debugging purposes. Contact
your ADLINK representative for details.
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F5h OEM defined command
Response 0 Complete Code 00h means OK