beautypg.com

2 specifications, 1 cpci-3510 processor blade specifications, Chapter 2, specifications: pre – ADLINK cPCI-3510 Series User Manual

Page 21: Cpci-3510 processor blade specifications, 2specifications

background image

Specifications

7

cPCI-3510

2

Specifications

2.1

cPCI-3510 Processor Blade Specifications

CompactPCI®
Standards

• PICMG® 2.0 CompactPCI® Rev. 3.0
• PICMG® 2.1 Hot Swap Specification Rev. 2.0
• PICMG® 2.9 System Management Rev. 1.0
• PICMG® 2.30 CompactPCI® PlusIO

Mechanical

• Standard 3U CompactPCI®
• Board size: 100mm x 160mm
• Single slot (4HP, 20.32mm); Dual slot (8HP, 40.64mm);

Triple-slot (12HP, 60.96 mm)

• CompactPCI® with HM type J1 connector, UHM type J2

connector

Processor

• Intel® Core™ i7-4700EQ Processor, 2.4 GHz, 6MB LLC

cache, TDP 45W

• Passive heatsink

Chipset

• Mobile Intel® QM87 Express Chipset

Memory

• Dual channel DDR3L-1600 ECC soldered memory
• Up to 8GB

CompactPCI
Bus

• PCI 32bit/ 33MHz; 3.3V, 5V universal V I/O
• Supports operation in system slot as master or in peripheral

slot as standalone blade without connectivity to CompactPCI
bus (Satellite mode)

Gigabit
Ethernet

• One PCIe x1 Intel® I217 GbE PHY and three PCIe x1 Intel®

I210 Gigabit Ethernet controllers

• Two egress 10/100/1000BASE-T ports on front panel, one

supporting Intel® AMT 9.0 by I217 controller

• Two egress 10/100/1000BASE-T ports routed to rear

transition module

Graphics

• Integrated on Intel® Core™ processor
• DVI-I port on front panel, VGA switchable to J2 (RTM) by

BIOS setting

• Analog monitor support up to QXGA 2048x1536 @75Hz,

32-bit

• Two DisplayPorts on front panel with resolution up to

2560x1600 @60Hz (cPCI-3510G only)

• Up to three independent display

USB

• Up to three USB front panel ports

Table 2-1: cPCI-3510 Processor Blade Specifications