ADLINK cPCI-3510 Series - Manual (Page 15)

Introduction 1
cPCI-3510
1 Introduction
1.1 Overview
The ADLINK cPCI-3510 Series is a 3U CompactPCI® PlusIO
compatible processor blade with soldered DDR3L-1600 ECC
memory up to 8GB. The ADLINK cPCI-3510 features an Intel®
Core™ i7 processor with Mobile Intel® QM87 Express Chipset.
The cPCI-3510 Series is a 3U CompactPCI blade available in sin-
gle-slot (4HP), dual-slot (8HP) or triple-slot (12HP) width form fac-
tors with various daughter boards to provide a broad range of I/O
requirements. Front panel I/O in the single-slot (4HP) version
includes 1x DVI-I, 2x GbE and 1x USB 3.0 port (these I/O are
common to all versions). Front panel I/O in the dual-slot (8HP) ver-
sion includes additional 2x USB 2.0, 1x COM, 1x KB/MS and
Line-in/Line-out on the cPCI-3510D or additional 2x DisplayPorts,
1x COM in RJ-45 connector, 1x KB/MS and 1x additional USB2.0
port on the cPCI-3510G. Two more dual-slot options are the
cPCI-3510L with additional 2x GbE, 1x COM and 2x USB and the
cPCI-3510M with one 100-pin high density connector supporting
additional 2x DVI-I/DP, 2x USB 2.0, 2x COM, 2x KB/MS and
Line-in/Line-out ports.
Graphics support is integrated on the CPU and allows 3 indepen-
dent displays on the front panel by selecting the cPCI-3510G with
additional 2x DisplayPorts. Storage includes a CFast slot or a
32GB SSD (optional) and 2.5" SATA HDD on the layer 2 riser card
(cPCI-3510D/P/L/M). One optional PCI 32-bit/66 MHz PMC site or
PCIe x1 XMC site is available on the 8HP or 12HP versions
(cPCI-3510S or cPCI-3510P/T).
Rear I/O signals to J2 include 4x PCIe x1, 3x SATA 3 Gb/s, and 3x
USB 2.0. GPIO and SMBus signals are also routed to the J2 con-
nector. The optional Rear Transition Module (RTM) provides 3x
SATA, 2x GbE, 2x USB, 1x COM (Tx/Rx) and 1x VGA port.
The cPCI-3510 is a high performance solution for factory automa-
tion and other industrial applications that require superior data
transfer capability and advanced computing power. The ADLINK
cPCI-3510 provides high manageability, supports Satellite mode
operation as a standalone blade in peripheral slots, and IPMI for